H&R TRAK+ ® Spoorverbreders verbeteren het uiterlijk en de bediening van uw auto met H&R TRAK+ ® Spoorverbreders. TRAK+ ® Spoorverbreders zijn compatibel met zowel de voor- als achterwielen.
H&R Wheel Spacers 25mm 5x100 - Hub 57,1mm - Bolt size M12x1,5 - Chrysler
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x100 - Hub 57,1mm - Bolt size M12x1,5 - Chrysler H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x100 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x100 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Skoda Fabia RS Type 5J only for rear axle. Using the spacers with steel rims is not possible.
H&R Wheel Spacers 25mm 5x100 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen - Black
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x100 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Skoda Fabia RS Type 5J only for rear axle. Using the spacers with steel rims is not possible.
H&R Wheel Spacers 25mm 5x108 - Hub 58,0mm - Bolt size M12x1,25 - Alfa Romeo/Lancia
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x108 - Hub 58,0mm - Bolt size M12x1,25 - Alfa Romeo/Lancia H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x108 - Hub 60,1mm - Bolt size M14x1,5 - Lotus/Renault
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x108 - Hub 60,1mm - Bolt size M14x1,5 - Lotus/Renault H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar/Volvo
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar/Volvo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Not applicable with steel rims: Jaguar F-Type Type QQ6: The original stud bolts have always to be shortened!. Jaguar S-Type/X-Type Type CCX/CF1 Ford Mondeo B4Y/B5Y/BWY Ford Mondeo BA 6 (up to model 2014) Volvo C30 Type M Volvo V40 Type M Volvo S40/V50 Type M
H&R Wheel Spacers 25mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar/Volvo - Black
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar/Volvo - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Not applicable with steel rims: Jaguar F-Type Type QQ6: The original stud bolts have always to be shortened!. Jaguar S-Type/X-Type Type CCX/CF1 Ford Mondeo B4Y/B5Y/BWY Ford Mondeo BA 6 (up to model 2014) Volvo C30 Type M Volvo V40 Type M Volvo S40/V50 Type M
H&R Wheel Spacers 25mm 5x108 - Hub 65,0mm
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x108 - Hub 65,0mm H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x108 - Hub 65,0mm - Bolt size M12x1,25 - Citroën/Peugeot
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x108 - Hub 65,0mm - Bolt size M12x1,25 - Citroën/Peugeot H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Peugeot 308 Type L: Using the spacers with steel rims is not possible.
H&R Wheel Spacers 25mm 5x108 - Hub 65,0mm - Bolt size M12x1,75 - Volvo
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x108 - Hub 65,0mm - Bolt size M12x1,75 - Volvo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x110 - Hub 65,0mm - Bolt size M12x1,5 - Cadillac/Fiat/Opel/Vauxhall/Saab
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x110 - Hub 65,0mm - Bolt size M12x1,5 - Cadillac/Fiat/Opel/Vauxhall/Saab H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x112 - Hub 63,3mm - Bolt size M12x1,5 - Ford
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x112 - Hub 63,3mm - Bolt size M12x1,5 - Ford H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x112 - Hub 66,5mm - Bolt size M12x1,5 - Chrysler/Mercedes
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M12x1,5 - Chrysler/Mercedes H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi/Mercedes
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi/Mercedes H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Not applicable with steel rims: Mercedes-Benz A-Class Type 176/176 AMG/245G/245G AMG Mercedes-Benz B-Class Type 246/245G Mercedes-Benz CLA Type 117/245G/245G AMG Mercedes-Benz SLK Type W172 Mercedes-Benz W205/S205 Type 204/204K Mercedes-Benz W231 (SL)
H&R Wheel Spacers 25mm 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi/Mercedes - Black
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi/Mercedes - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Not applicable with steel rims: Mercedes-Benz A-Class Type 176/176 AMG/245G/245G AMG Mercedes-Benz B-Class Type 246/245G Mercedes-Benz CLA Type 117/245G/245G AMG Mercedes-Benz SLK Type W172 Mercedes-Benz W205/S205 Type 204/204K Mercedes-Benz W231 (SL)
H&R Wheel Spacers 25mm 5x114,3 - Hub 59,5mm - Bolt size M12x1,5 - Mazda
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x114,3 - Hub 59,5mm - Bolt size M12x1,5 - Mazda H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x114,3 - Hub 60,1mm - Bolt size M12x1,5 - Lexus/Toyota
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x114,3 - Hub 60,1mm - Bolt size M12x1,5 - Lexus/Toyota H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Not applicable with steel rims: Toyota Corolla Verso Type R1/AR2 Toyota Auris E15UT(a)/E15UTN(a)/HE15U(a) Toyota Avensis T27 Toyota Avensis Verso M2/T25/Picnic XM1 Toyota RAV 4 XA1 Toyota RAV 4 A2/RAV 4 XA3 (a)/Previa R3 Toyota RAV 4 Hybrid Type XA4/XA3
H&R Wheel Spacers 25mm 5x114,3 - Hub 64,0mm - Bolt size M12x1,5 - Honda
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x114,3 - Hub 64,0mm - Bolt size M12x1,5 - Honda H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Not applicable with steel rims: Honda CR-Z Type ZF1 Honda Civic FD 1/3/4/6/7, FK 1/2/3, FN1/2/3/4
H&R Wheel Spacers 25mm 5x114,3 - Hub 66,2mm - Bolt size M12x1,25 - Nissan
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x114,3 - Hub 66,2mm - Bolt size M12x1,25 - Nissan H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x114,3 - Hub 67,1mm - Bolt size M12x1,5
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x114,3 - Hub 67,1mm - Bolt size M12x1,5 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Using the spacers with steel rims is not possible.
H&R Wheel Spacers 25mm 5x114,3 - Hub 70,0mm - Bolt size M12x1,5 - Honda
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x114,3 - Hub 70,0mm - Bolt size M12x1,5 - Honda H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x114,3 - Hub 70,5mm - Ford
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x114,3 - Hub 70,5mm - Ford H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Using the spacers with steel rims is not possible. The original stud bolts might have to be shortened!
H&R Wheel Spacers 25mm 5x114,3 - Hub 71,5mm - Jeep/Dodge
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x114,3 - Hub 71,5mm - Jeep/Dodge H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Not applicable with steel rims: Jeep Wrangler Type TJ/Cherokee Type KJ/XJ/J/KK Chrysler Nitro Type KJ Jeep Cherokee Type KK: The original stud bolts have always to be shortened!
H&R Wheel Spacers 25mm 5x114,3 - Hub 71,5mm - Bolt size M12x1,5 - Chrysler
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x114,3 - Hub 71,5mm - Bolt size M12x1,5 - Chrysler H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Not applicable with steel rims: Chrysler Voyager Type ES/GS/RG
H&R Wheel Spacers 25mm 5x120 - Hub 72,5mm - Bolt size M12x1,5 - BMW
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x120 - Hub 72,5mm - Bolt size M12x1,5 - BMW H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x120 - Hub 72,5mm - Bolt size M12x1,5 - BMW - Black
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x120 - Hub 72,5mm - Bolt size M12x1,5 - BMW - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x120 - Hub 74,0mm - Bolt size M12x1,5 - BMW
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x120 - Hub 74,0mm - Bolt size M12x1,5 - BMW H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x120 - Hub 74,0mm - Bolt size M12x1,5 - BMW - Black
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x120 - Hub 74,0mm - Bolt size M12x1,5 - BMW - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x120,65 - Hub 73,8mm - Jaguar
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x120,65 - Hub 73,8mm - Jaguar H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Not applicable with steel rims: Jaguar XK8/XKR
H&R Wheel Spacers 25mm 5x127 - Hub 71,5mm - Jeep
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x127 - Hub 71,5mm - Jeep H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Using the spacers with steel rims is not possible.
H&R Wheel Spacers 25mm 5x98 - Hub 58,0mm - Alfa Romeo
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x98 - Hub 58,0mm - Alfa Romeo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x98 - Hub 58,0mm - Bolt size M14x1,5 - Citroën/Fiat/Lancia/Peugeot
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x98 - Hub 58,0mm - Bolt size M14x1,5 - Citroën/Fiat/Lancia/Peugeot H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x98 - Hub 58,5mm
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x98 - Hub 58,5mm H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 30mm 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Fiat/Opel/Vauxhall
H&R DRA-System Wheel spacers:- 30mm per spacer - 60mm per axle - Bolt pattern 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Fiat/Opel/Vauxhall H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 30mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - BMW/Seat/Volkswagen
H&R DRA-System Wheel spacers:- 30mm per spacer - 60mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - BMW/Seat/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 30mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - BMW/Seat/Volkswagen - Black
H&R DRA-System Wheel spacers:- 30mm per spacer - 60mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - BMW/Seat/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!